canon imageclass mf733cdw counterfeit cartridge

When handling the toner cartridge, hold it properly, as shown in the illustration below.If the toner is not distributed evenly inside the cartridge, this may cause poor print quality.Shake the toner cartridge before replacement. Canon is not responsible for any malfunction, accident or damage caused by the use of counterfeit toner cartridge. Use of counterfeit toner cartridge may result in poor print quality or machine performance. Please be aware that there are counterfeit Canon toner cartridges in the marketplace.For optimum print quality, replace the toner cartridge with the Genuine Canon Toner.īe careful of counterfeit toner cartridges.The full length of the sealing tape is approximately 20' (50 cm).įit the protrusions (A) on sides of the toner cartridge into the guides located on sides of the machine and slide the toner cartridge into the machine until the toner cartridge comes to rest and is held against the back of the machine. Place the toner cartridge on a flat surface, lift the tab, and gently pull the sealing tape completely out. Gently shake the toner cartridge five or six times to evenly distribute the toner inside the cartridge.Ĩ. Tear the notch with hands to open the protective bag.ħ. Take out the new toner cartridge from the protective bag. Hold the grip on the left front side of the toner cover.Ħ. In such case, remove it from the platen glass.ģ. * The platen glass may not be completely closed when a thick document such as books is placed inside. Do not try to forcefully lift the scanning platform, as this may damage the machine. Make sure that the platen glass is completely closed. When you cannot lift the scanning platform

Canon imageclass mf733cdw counterfeit cartridge